English
Français
Español
Deutsch
Home · News
News
-
Industry News2026-05-14
What Are the Key Process Challenges When Using Two-Color Plastic Injection Mold for Complex Parts?
Material Compatibility and Thermal Analysis Selecting polymers with compatible tensile strength and coefficient of thermal expansion is critical for Two-Color Plastic Injection Mold applications. High Tg (glass transition temperature) resins minimize warping during mul...
View More
-
Industry News2026-05-14
What Are the Key Material Properties to Consider for Reliable Plastic Multi-Way Connectors?
Mechanical Strength and Physical Performance Analysis Evaluating tensile strength and impact resistance is essential for Plastic Multi-Way Connectors in high-load applications. Flexural modulus influences connector deformation under repeated insertion/extraction cycles...
View More
-
Industry News2026-05-14
Why Are Plastic Injection Molding Products So Widely Used in Industry?
1. What Are Plastic Injection Molding Products Plastic Injection Molding Products refer to plastic parts produced through the injection molding process. The basic principle is that plastic raw materials are heated until melted and then injected under high pressure into ...
View More
-
Industry News2026-05-14
How Does Robot Shell Injection Mold Improve Precision in Industrial Automation Manufacturing?
Introduction: The Growing Role of Robot Shell Injection Mold in Industry The rapid expansion of industrial automation has significantly increased the demand for high-performance robotic systems. As robots are deployed in more complex environments such as manufacturing l...
View More
-
Industry News2026-05-14
What Are the Common Challenges When Molding Internal Threads in Precision Plastic Components?
Material Selection and Thermal Behavior Analysis Choosing thermoplastics with appropriate tensile strength and thermal expansion coefficient is critical for molding internal threads. High glass transition temperature (Tg) materials reduce thread deformation during ejec...
View More
-
Industry News2026-05-13
Injection Plastic Parts: The Complete Guide to Design, Manufacturing, and Applications
1. What Are Injection Plastic Parts? A Technical Introduction Injection plastic parts are mass-produced components created by injecting molten polymer materials into a precisely engineered mold cavity under high pressure. This process enables the rapid, repeatable, and ...
View More
-
Company News2026-02-25
European customers come to the factory to inspect Fanze Mold
With the rapid development of the company and continuous innovation in research and development technology, Fanze T&M formerly known as Shanghai Fanze Precision Mould Co., Ltd., was founded in 2005 and specializes in the development of injection moulds and the manuf...
View More
-
Company News2026-02-25
Fanze Mold warmly welcomes new and old customers to visit and inspect
Recently, a delegation from a certain electronic technology company in Shanghai visited Fanze T&M (Jiashan) Co., Ltd. for inspection. Fanze Mold&Plastic General Manager Wu Yuanhui and department heads warmly received and accompanied the visit and inspection. Th...
View More
Categories
- Company News(2)
- Industry News(6)
- Automotive interior plastic parts injection mold
- Automobile wire harness
- EV Charging pile plastic injection mold
- Motorcycle Fairings & Bodywork plastic injection mold
- High-Gloss Transparent PC injection mold
- Robot shell injection mold
- Home Appliance Injection Parts
- Threaded Plastic injection molded part
- Plastic Multi-way Connectors
- Two-color Plastic component & tool
- Printer Components & Parts
